Remington BS1812A - Manual (Page 13)

13 www.desatech.com
TRIMMER/EDGER OPERATION
EN
GLI
S
H
Figure 27 - Replacing spool into spool
housing
Figure 28 - Replacing spool cover onto
spool housing
USING EDGER
1. Make sure trimmer/edger line is advanced
to full cutting length.
2. Roll the trimmer/edger using the edging
wheel attached to the cutting guard (see
Figure 29).
3. Start the trimmer/edger and trim along
edging lines. Be sure to keep the cutting
lines vertical.
Figure 29 - Edging