Radio Shack PRO-106 - Manual (Page 7)

12
13
every fr
equency for each site in the network as a
separate trunked radio system. You will find that networked EDACS systems ar
e
configur
ed in the pr
epr
ogrammed data in one
of thr
ee dif
fer
ent ways, depending on the space
available in the V
-Scanner wher
e the networked
EDACS system can be found, and depending on the type of system and size of the jurisdiction wher
e it is deployed. The
“Preprog
rammed Data
Director
y”
lists these as Methods 1, 2, and 3.
Wher
e a networked EDACS system has been
configur
ed using Method 1, we have assigned
individual sites to individual Scan Lists. By turning all of the Scan Lists on (for every site in the networked EDACS system), you should be able to achieve a sort of “Roaming” functionality
, as
described above in the section above r
egar
ding
Motor
ola and P25 Multi-site systems. Y
ou can
toggle the scan lists on and of
f to exclude certain
sites in the network fr
om scan operation.
Wher
e a networked EDACS system has been
configur
ed using Method 2, we have assigned
one or mor
e sites to the same Scan Lists.
Typically
, these sites will be located in rural ar
eas,
and the scanner should find and use the best site in the gr
oup for scanning. If necessary
, you can
lock out the TSYS objects associated with systems that you do not want to scanner to monitor
.
Wher
e a networked EDACS system has been
configur
ed using Method 3, we have assigned all
of the sites in the network to the same Scan List. The scanner should find and use the best site in the gr
oup for scanning. If necessary
, you can lock
out the TSYS objects associated with systems that you do not want to scanner to try and monitor
.
Using the Preprog
rammed Data
Preprog
rammed Data Director
y
The following pages pr
ovide a dir
ectory of the
pr
epr
ogrammed contents of the V
-Scanner
folders as shipped fr
om the factory
. The columns
ar
e defined as follows:
RR System Name
The System Name as listed on RadioRefer
ence.com
VS Name
Name of the V
-Scanner file
VS
The V
-Scanner number wher
e the
system can be found
SL
The Scan List number that the system is assigned to
System Name
The system name as displayed by the radio
State
The state wher
e the system is
located
User T
ype
State wide, County
, City
, or
Regional (Regional = mor
e than
one city or County)
System Type
Motor
ola: an analog or mixed
mode Motor
ola system using a
3600 baud contr
ol channel
Pr
oject 25: Any APCO Pr
oject 25
system EDACS W
: EDACS W
ide (9600CC)
EDACS N: EDACS Narr
ow (4800CC)
Net EDACS W/N 1, 2, or 3: A networked EDACS system stor
ed
using Method 1, 2, or 3 (see the “Monitoring Network
ed ED
A
CS Systems”
section above) LTR: a Logic T
runked Radio (L
TR)
system
Using the Preprog
rammed Data