AEG F 77012 M 0 P - Manual (Page 31)

8.4 Before starting a
programme
Make sure that:
• The filters are clean and correctly in-
stalled.
• The spray arms are not clogged.
• The position of the items in the bas-
kets is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tab-
lets).
• The cap of the salt container is tight.
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains sock-
et. Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
A
B
C
C
1. Turn the filter (A) counterclockwise
and remove it.
A1
A2
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Put the filter (B) to its initial position.
Make sure that it assembles correct-
ly under the two guides (C).
ENGLISH
31