Radio Shack ET-918 - Manual (Page 8)

8
2. Plug one end of the supplied long
modular cord into the TEL LINE
jack on the back of the base.
3. Route the modular cord through
the right slots on the bottom of the
base.
4. Insert the supplied AC adapter’s
barrel plug into the DC IN 9V jack
on the back of the base.
5. Route the adapter’s cord through
the left side of the strain relief slot
on top of the base and through the
left slots on the bottom of the
base.
6. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
7. Plug the modular cord into a mod-
ular phone line jack.
Strain Relief
Slot
43-1088_90.fm Page 8 Tuesday, August 17, 1999 2:57 PM