Remote Technologies IR-PRO T3 - Manual (Page 11)

T3 Universal System Controller
4
ƒ Both infrared (IR) and radio frequency (RF) output options.
You can even use both options on the same unit.
ƒ A built in motion sensor can automatically turn the unit on
when it is picked up.
ƒ A USB port for communication with the TheaterTouch
Designer programming software.
ƒ Non-volatile flash memory. The T3 will not lose any
programmed data when the battery is removed.
ƒ One-year parts and labor warranty
ƒ Available only to system integration professionals.
IMPORTANT NOTES
Please read these important notes about the T3:
ƒ The T3 should be placed in an area where it is around
normal room temperature (between 60
°F to 90°F). If the
temperature is too hot, the display appears dim. If the
temperature is too cold, the display appears dark and may
respond slowly.
ƒ Do not use sharp objects on the touchscreen. It is designed to
operate with a touch of your finger.
ƒ Do not let the T3 get wet. It should not be handled with wet
hands or placed in an area where it could get wet.
ƒ Do not subject the T3 to smoke, dust, or vibrations. The
display may be damaged from excessive shock or vibration.
ƒ Only use the power supply that is provided with the T3.
Using the wrong type of power supply may result in
damage to the battery or electronic components.