Ratoc Systems CBFW3 - Manual (Page 62)

Macintosh
58
7-2.Inserting the CBFW3
1.Insert the CBFW3 into the PC Card slot as shown below.
Refer to the manual that accompanied with your Mac for the location of the PC Card slot.
NOTE
You may not be able to insert another PC Card with the CBFW3 simultaneously.
You may not be able to insert the CBFW3 in the upper PC card slot.
To remove the PC Card from the Mac, refer to the manual that accompanied your Mac
for the instruction.
2.If the following PC Card icon mount on the desktop, you succeeded the installation.
If the following PC Card icon mount on the desktop, you failed to succeed the installation.
In this case, the CBFW3 driver may not be installed correctly. Check the CBFW3 driver
is installed to the [Extensions] folder correctly.