Rockford Fosgate 240X4 - Manual (Page 21)

Mono Operation
+ L– + R–
Input
2-Ch.
{
+ – + –
Rear XCard Front XCard
4 ohm 4 ohm
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard* Front XCard*
LP LP
2-Channel Input
– L+ – R+
– 17 –
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear operates independently
• Impedance for front bridged channel should be no less than 4
Ω
• Impedance for rear bridged channel should be no less than 4
Ω
• Front XCard can be set for High-Pass, Low-Pass or Full Range
• Rear XCard can be set for High-Pass, Low-Pass or Full Range