Stereo operation – Rockford Fosgate 240X4 User Manual
Page 20

Stereo Operation
+ L –
+ R –
Input
2-Ch.
{
+
–
+
–
Rear XCard
Front XCard
4 ohm
4 ohm
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard*
Front XCard*
LP
LP
2-Channel Input
– R +
– L+
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear must be set equally to balance left and right
channels
• Impedance for left bridged channel should be no less than 4
Ω
• Impedance for right bridged channel should be no less than 4
Ω
• XCards for front and rear are set identically as High-Pass, Low-Pass or
Full Range
– 16 –
This manual is related to the following products: