Russound CAS44 - Manual (Page 35)

35
INSTALLER
KPL KEYPAD SETUP AND DIAGNOSTIC MENUS
KPL Setup Menu
The KPL Setup menu is used to
choose source names, check the
version number and perform a
Factory Initialization of the CAS44
controller. The menu is outlined in
the diagram at right.
To access the Setup Menu, press
and release the Setup button on the
right side of the keypad until
“SrcNm” (source names) appears on
the display. Press the Source button
to toggle through the menu options,
then press the Power button to enter
menus. Use the Volume Up/Down
buttons to scroll through the selec-
tions. Press the Power button to
enter a selection.
When finished, press and release the
Setup button again.
KPL Diagnostics Menu
The Diagnostics Menu allows the
installer to run a diagnostic check
on the keypad and to verify the
firmware version of the keypad.
To access the Diagnostics Menu,
press and hold the Setup button on
the right side of the keypad until
“Diags” appears on the display. The
menus are outlined in the diagram
at right.
When finished, press and release
the Setup button again.
KPL Setup Menu
SOURCE SOURCE
FACT INIT
Procedure
Are You
Sure?
SOURCE
Yes
No
DIAGNOSTICS CONTROLLR
ID
PORT ID
BUTTON
TEST
Displays
Controller ID
number
Press and
Hold
Setup Button
KEYPAD ID VERSION
Press button
to be tested
DISP
CHAR
DISP
BLOCK
DISP
ROW
Displays
Port ID
number
Displays
Keypad ID
number
Displays
current firmware
version
KPL Diagnostics Menu
SOURCE
SOURCE SOURCE
SOURCE SOURCE
SOURCE SOURCE SOURCE
Press
Vol Up/Dwn
to scroll
characters
Press
Vol Up/Dwn
to scroll
blocks
Press
Vol Up/Dwn
to scroll
rows
SOURCE