RCA 516 - Manual (Page 38)

Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20050429-0098 v1.0
30
Starting a broadband
Internet session
Proceed as follows:
1 Click the Internet Connect dockling.
2 The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list.
3 If needed, enter user name and password for your user account at the Service
Provider.
4 Click Connect.
5 As soon as the connection is established you can open your web browser and
surf the Internet.
Terminating a
broadband Internet
session
Proceed as follows:
1 Click the Internet Connect dockling.
2 The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list
3 Click Disconnect.
4 The connection is released. As a result no Internet connectivity exists any
more.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet
Connect
.