2 local network setup, Ethernet network, Standard wiring procedure – RCA 516 User Manual
Page 25: Local network setup
Chapter 2
Local Network Setup
E-DOC-CTC-20050429-0098 v1.0
17
2 Local Network Setup
Ethernet network
The Ethernet port on the back panel of your SpeedTouch™ allows you to connect the
SpeedTouch™ to an existing 10 or 100 Base-T Ethernet network or to a computer
with installed Ethernet card.
Standard wiring
procedure
Use the yellow Ethernet cable provided to wire your computer’s Ethernet port to the
SpeedTouch™’s Ethernet port.
The Ethernet cable can also be used to wire the Ethernet port of your SpeedTouch™
to an external hub or switch.
In the SpeedTouch™ package, a yellow full-wired straight-through RJ-45/RJ-
45 Ethernet cable is included.
Please follow the installation instructions supplied with the external hub or
switch for connections and Ethernet cabling.