Roberts Radio RD-22 - Manual (Page 6)

Mains operation
1. Place your radio on a fl at surface.
2. Plug the mains lead into the Socket located on the rear of your radio
ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into a wall socket and switch on
the wall socket.
Remote handset battery replacement
1. With the aid of the end of a paper clip slide catch in direction
shown.
2. Remove battery holder by pushing holder in direction shown.
3. Remove battery from holder.
4. Replace battery (CR2025 or equivalent) ensuring that positive side of
battery faces you with holder positioned as shown.
5. Replace the battery holder.
1
2
5
3 4
5