Roberts Radio RD-22 - Manual (Page 27)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
26
Connecting to an external amplifi er or recorder
You can connect your radio to an external amplifi er or recorder. This may
be a stand-alone unit or it may be part of your existing hi-fi system.
1. Connect the optical toslink connector to the optical input socket(s) on
your amplifi er or recorder using a suitable cable.
Recording from your radio
Your radio has six alarm/timers which can be set to switch on your radio
at a preset day, time, and station. See section on page 21 for details on
how to set alarm/timers
1. A programme/station can be recorded to an external device via the
optical toslink connector located on the rear of your radio. Connect
the optical toslink connector to the optical input socket(s) on your
recorder using a suitable cable.
Most mini disc units have a record pause mode that enables the mini
disc to start recording as soon as a signal appears on the mini disc
input. When your radio switches on controlled by the alarm timer the
mini disc will start recording.
Subsequent timer events are then recorded onto track 2,3, etc. Consult
your hi-fi or mini disc user guide for further details. The volume on
your radio can be set to 0 so that you will not be disturbed during the
recording. The volume control does not affect the recording level.
Note: The timer record function is for personal use only.
1