Rival S11P - Manual (Page 4)

-4-
KNOW YOUR ELECTRIC SKILLET
Figure 1
HOW TO ASSEMBLE YOUR ELECTRIC SKILLET
Remove all parts from the packaging.
1. Locate Lid Knob in packaging.
2. Holding Lid Knob on the outside top of the Glass Lid, align hole
in Lid Knob into hole located on the outside of the Lid. Knob
should be centered on Glass Lid.
3. Place the Phillips head screw through screw hole on the inside
of the lid.
4. Tighten screw until snug. Do not overtighten. The Lid is now
ready for use.
Temperature Control probe
Temperature Control dial
Spoon Rest
(located on
both sides
of skillet)