Nokia M1122 - Manual (Page 95)

M1122 Administrator Manual
E Copyright Nokia Networks Oy C33906001SE_00 5-60
Command Define and activate host acces list
Description You can define up to four IP addresses from which MW
1122 can be accessed using telnet or http. f you define
one or more addresses, M1122 can be accessed from
the specified addresses only.
Syntax [no] ip host-acl
Arguments no switches host access list off.
ip-address is the allowed host address and ip-
mask is its subnet mask.
Example
M1122(conf-common)#ip host-acl 192.168.1.17
255.255.255.0
M1122(conf-common)#
Command Switch on/off dynamic host configuration protocol
Description Switches on/off dynamic host configuration protocol.
Syntax [no] dhcp mode
Arguments no switches off DHCP.
service parameter value is server when you want to
use M1122 as a DHCP server.
Example
M1122(conf-common)#dhcp mode server
M1122(conf-common)#