Nokia M1122 User Manual
Page 42
E
Copyright Nokia Networks Oy
C33906001SE_00
5-7
1. Use CLI to issue
install tftp:/
command,
where
is the IP address of the TFTP server containing the new software and Gx1x2200.R00 is the name of the file to be downloaded. The command copy tftp:/ can be used alternatively. 2. After you will see transfer status SUCCESSFUL message, restart M1122 to activate the new software. Downloading configuration or application from monitor Monitor is a small application that is executed before the actual local MAC=00:40:43:02:36:72; Using M111/850 eth conf Type ’m’ (fast) followed by ’o’ (in 10 sec) to activate Monitor Nokia Networks (C) 1999 Nokia Boot B-R0.0.0. built on Apr 4 2000 11:27:55 MON> The following commands are available for file handling in the D rename D delete D dir M1122 has two methods of retrieving files: D TFTP D XMODEM You can retrieve files from a TFTP server using the commands in the MON>ipa 192.168.1.1 ip=192.168.1.1 ipserver=0.0.0.0 ipgw=0.0.0.0 serverfile= MON>ips 192.168.1.100
software image is started. Typically the Monitor automatically loads
the application file image.exe. You can activate the Monitor by
pressing “m” followed by “o” in the very beginning of the system
startup:
Monitor:
following example: