Newcon Optik DN483 - Manual (Page 3)

iii
IMPORTANT INFORMATION
Read prior to activation.
DN 482/483 is a sophisticated electronic device. To operate it properly, please read
this manual carefully. Ignoring operation procedures described in this manual will
void your warranty.
• NEVER disassemble the unit. This device contains a source of high voltage, which
may be hazardous to your health.
• NEVER open objective lens of an active unit in bright light, including daylight. In
the daytime the objective lens must be covered by caps. A tiny hole in each cap
provides enough light for daytime testing.
• NEVER aim active unit at intense light sources, such as lights, headlamps,
campfires, the Moon, etc.
• NEVER reverse the polarity of a battery.
• NEVER connect the unit to external power sources.
• ALWAYS remove battery when the unit not in use for a long period.
• ALWAYS keep the objective lenses covered when not in use.
• ALWAYS store the unit in a warm dry place.
Precautions
DN 482 (DN483) is a sophisticated precise optical instrument equipped with
electronics. It should be handled with due care:
• Unit contains fragile components. Avoid impacts, dust, moisture and sharp changes
of temperature.
• Do not touch the optical surfaces other than for cleaning. Doing so may damage the
anti-reflection coating.
• Clean optical surfaces with professional lens cleaning supplies.
• Use only a soft clean cloth to clean the exterior of the device.
• Keep the unit away from sources of heat, such as heating appliances, sunlight or
central heating.
• Switch off the unit and remove the battery during the extended periods of non-
operation.
• Do not keep the device at temperatures higher than 60 o
C (140
o
F).
• Do not apply excessive force or pressure to the lens assembly, movable parts and
threaded connections.
• Small dark and/or light points may be seen in the field of view due to considerable
optical magnification of the eyepiece. This does not affect the operational
capabilities of the device.