Network Technologies SM-nXm-AV-LCD User Manual

Page 16

6) Connect All Audio Outputs/Users to an Input/CPU

- connect all outputs to an input (Audio ports only)

7) Change Mute Status for Audio Output/User

- mute or un-mute the Audio port output

8) Change Volume for Audio Output/User

- change Audio port output volume

9) Read

Connection

for KVM Output/User

- read what input is connected to the specified output (KVM ports only)

a) Read

Connection

for Audio Output/User

- read what input is connected to the specified output (Audio ports only)

b) Read Mute Status and Volume for Audio Output/User

- read the volume and the mute status of the specified output (Audio ports only)

c) Read Unit Size

- read the switch size (number of inputs and outputs)

d) Read Unit Version/Revision String

- read a string containing the switch version, type, and size

e) Save I/O Connections into Unit Memory

- save the connections into switch memory bank

f) Restore I/O Connections from Unit Memory

- restore the connections from switch memory bank

g) Save All Units I/O Connections into Units Memory

- save the connections into switch memory bank, command for all switches

h) Restore All Units I/O Connections from Units Memory

- restore the connections from switch memory bank, command for all switches

Change All Units Baud Rate (9600/COM1:)

- change RS-232 Baud rate of all switches
- the current baud rate and serial port are displayed in parentheses

SET OPTIONS

1) select Com port current: (COM1:)

- select PC serial port
- the current PC serial port is displayed in parentheses

2) select Baud rate current: (9600)

- select PC serial port baud rate
- the current baud rate is displayed in parentheses

3) set unit Address current: (1)

- select the unit address of the switch to be connected to by this program
- the current address is displayed in parentheses

For any selection that requires user input, the user is prompted. When commands are sent to the matrix unit, the command string
and matrix unit responses are echoed to the screen. All commands generated by the program are formatted according to the
information provided in sections above. If any transmission problems are detected, an error message is displayed.

Matrix Switcher's Control Program For Windows 9X, NT, AND 2000

This software is an easy and powerful graphical program that controls NTI matrix switches through an
RS232 interface.

The software performs best on monitors set to a screen resolution of at least 800 X 600. Refer to the
selection "Documentation" in the NTI program menu for instruction on how to operate the Matrix Switcher's Control Program.