Nlynx MinIT6000 - Manual (Page 69)

Security
Using the security dialog box, you can prevent someone from changing your terminal's
properties.
Settings Window
Enable Password
Enable this check box to activate the terminal's security. If enabled, you can set and
confirm a new password. The factory default password is
"guest" .
Note: The password is designed to avoid any unreasonable change to the
Terminal Properties Settings. Please do NOT change the password unless you are
the administrator. If you forget the password, you will need outside assistance to
get back in to configure the terminal. Please save your password carefully.
There are two methods to recover from forgetting the password.
• Contact your vendor for help. (to get a super password.)
• Use the Remote Management software to recall your terminal settings.
Disable Terminal Connection Configure Tab
Select this check box to disable the configure tab of terminal connection manager.