Side shelf installation, Assembling end caps to side shelf – Napoleon Grills 485RSIB User Manual
Page 22
22
www.napoleongrills.com
12. Side Shelf Installation
Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side shelf over the screw heads and finish tightening.
3/8”(10mm)
10 x N570-0073 (1/4-20 X 3/8”)
Bend tabs on front of shelf up
with a flat head screw driver,
insert screw through tab and
into end cap.
Tabs located on either side of ice bucket
must engage notches in side shelf.
11. Assembling End Caps to Side Shelf
Peel protective coating from side shelf. Attach corresponding end cap as shown using (5) 1/4 – 20 x 3/8” screws.