Navigon PNA 5100 User Manual
Page 48
User's manual
NAVIGON 5100 | 5110
- 48 -
Configuring NAVIGON 5100 | 5110
The settings of the individual windows are distributed on several
windows. You can toggle between these windows with the
(To the Left) and
(To the Right) buttons.
Some settings can only accept two or three different values. These
settings can be recognised by the
(Toggle) button. All potential
values are visible. The value that is currently valid is highlighted in
black.
►
Tap the
(Toggle) button to alternate between the potential
values.
Some settings can accept several different values. These settings can
be recognised by the
(List) button. The value that is currently valid
is visible.
1. Tap
the
(List) button.
A list with all potential values opens. The value that is currently valid
is marked.
2. Tap the desired value. It is now marked.
3. Tap
the
OK button.
The list closes again. The new value will be displayed.
For each setting there is a
(Help) button. When you tap it, you will
see a precise explanation of the corresponding setting.
You can close the settings windows in two ways:
►
Tap the Done button.
Any changes you have made will be adopted.
►
Tap the Cancel button.
Any changes you have made will not be adopted.
The S
ETTINGS
window is open again.