Numark Industries CDN22 User Manual

Page 8

CDN-22

DESCRIPTION CDN-22 REMOTE FEATURES

1 . P R O G R A M - Depress this button and the unit will stop and
the program indicator will light. Select each track to be
programmed and press the PROGRAM button between
selections. You can program up to 30 tracks. Press PLAY to
start the program. To exit and erase program hold the program
button down for more than 2 seconds while the unit is stopped,
open the disc tray, or turn off the power.

2 . C O N T / S I N G - Will cause just a single track to play or all
tracks in order by pressing once or twice.

3 . LCD DISPLAY - Indicates all the functions, as they are
occurring, with the CD. These functions are explained in the next
section.

4 . TIME (Time Button) - The TIME button switches the time
display between elapsed playing time and remaining time on the
track.

5 . OPEN/CLOSE (Disc Tray Open/Close) - Press to
load or eject the disc. Each press will open or close the disc tray
on the transport. NOTE: Tray will not open unless the disc has
been paused.

6 . TRACK (Track Buttons) - These buttons are used to
select the track to be played.

7 . Track 10 Button - This button is for quickly advancing to
higher tracks on a CD.

8 . PITCH (Pitch Button) - This button activates the Pitch
Slider (14).

9 . PITCH BEND (Pitch Bend Button) - When each of the
two CD players is playing a CD, the pitch bend function allows the
positioning of the bass beats to be matched after the pitch of
each disc is matched. Either player can “catch up” or “fall back”
to match the other player. The pitch will automatically rise while
the + button is pressed (allowing “catch up”) and return to the
original pitch when the button is released. The pitch will
automatically drop while the - button is pressed (allowing “fall
back”) and return to the original pitch when the button is

released. By changing the pitch of one disc with respect to the
other in this way the beats can be matched.

10. SEARCH WHEEL (OUTER RING) - This wheel has 3
forward and 3 reverse speed positions for searching through
songs. The more you turn the wheel in either direction the faster
you search through the music.

1 1 . J O G W H E E L ( I N N E R R I N G ) - This jog wheel serves 2
functions depending on the mode you are working in.

a . The jog wheel will act as a slow frame search control when

the CD is not playing but either paused or set to a cue point. To
set a new frame cue point, spin the wheel then press play when
you have determined the proper position. Press CUE to return to
the “CUE POINT”.

b . The jog wheel will temporarily bend the pitch of the music

if the song is already playing by rotating the wheel clockwise to
speed up or counterclockwise to slow down.

1 2 . C U E - Pressing the CUE button during play provides a return
to the position at which play was started. If PAUSE is used
before CUE, that will become the cue point. Alternately pressing
the PLAY button and the CUE button allows the CD to be played
from the same position any number of times. The CUE LED will
light up from the time the CUE button is pressed until the CD has
reset to the position at which play was started. Steady lighting of
this LED indicates the ready condition.

1 3 . S T A R T / P A U S E ( P l a y / P a u s e B u t t o n ) - Each press of
the Play/Pause Button causes the operation to change from play
to pause or from pause to play.

1 4 . P I T C H S L I D E R - The pitch can be changed up to
+/-12% by pressing the PITCH button so the PITCH LED is lit,
then moving the sliding fader. The pitch will not be changed if the
PITCH LED is off.

Numark - The Proven Leader in DJ Technology

http://www.numark.com