Napco Security Technologies GEM-DXRP2 User Manual
Page 20
20
K E Y P AD F U N C T I O N S
Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours, 15 minutes, as follows:
For a 1-hour, 15-minute delay, press
1
, then
D
.
For a 2-hour, 15-minute delay, press
2
, then
D
.
For a 3-hour, 15-minute delay, press
3
, then
D
.
For a 4-hour, 15-minute delay, press
4
, then
D
.
Fifteen minutes prior to arming, the siren will sound a 2 second warning and the key-
pad will begin a 15 minute countdown with the sounder pulsing. During this time, arm-
ing may be delayed an additional 1 to 4 hours (as above), or autoarming may be can-
celled by arming and disarming the panel.
Activate Program?
(Program Mode programmed for user?
YES
NO).
Activates
the Program Mode from Keypad No. 1 only. Note: This feature is disabled while
armed.
Activate Download? Activates the Manual Download Mode from Keypad num-
ber 1 (For installer or servicer's use only). Note: This feature is disabled while
armed.
A C O N
D e l a y / A r m 1 - 4 /
/ N o
A C O N
T u r n O n / P r o g /
Y e s / N o
A C O N
T u r n O n / D w n L d
Y e s / N o