NorthStar Navigation GM1708 961XD - Manual (Page 36)

SECTION TWO - Installation
Page 26 961 INSTALLATION MANUAL Revision A
Figure 17: PL-259 (UHF) connector
Turning the unit on and off
Turning the unit
on
To activate the unit, briefly press the PWR key. This activates the control
head and the processor. After several minutes, the INITIAL STARTUP
screen appears (as shown in Figure 18 below). This screen displays for
about five to ten seconds. The unit will then perform a series of system
self-tests in which it checks critical components and functions for any
errors, as shown in Figure 19.