Nostalgia Electrics CCP200 - Manual (Page 9)

ENGLISH
7
Assembly of Base Support
Attach Push Handle (E) from inside Storage 1.
Compartment (C) using supplied #1 Screws.
Insert Cross Bar (K) into the square inserts on the inside of Base Support (I) 2.
and secure from above with two #2 Bolts. Insert the Leg Assembly (L) over
the protruding ends of the Base Support (I) and fasten from the inside of Base
Support (I) using four #4 Bolts, four #5 Flat Washers, and four #6 Nut Caps.
Secure Bottom Plate (J) to Base Support (I) using four #2 Bolts. 3.
Assemble Base Support (I) into the bottom of the Storage 4.
Compartment (C) and secure with four #3 Bolts.