Native Instruments B4 II - Manual (Page 35)

B4 II – 35
DXi 2 plug-in
DXi is a Microsoft DirectX technology based plug-in format
Use in Sonar 4
• Launch Sonar
• In the synth rack choose B4 II DXi 2.
Loading the DXi 2 plug-in in the synth rack
• Route a MIDI track to the DXi 2-Plug-in by selecting B4 II in the Out
drop down list.
Assign a MIDI track to the B4 II -DXi-Plug-in
After having loaded an Instrument from the library you should be able to trig-
ger it via MIDI using a keyboard controller. B4 II’s sound will generate through
Sonar’s mixer and directly to your sound card. If the plug-in does not receive
MIDI or generate audio, then make sure to check the following two areas:
• Make sure MIDI Patch Through is enabled in the Studio menu of
Sonar.
• The MIDI channel of your MIDI track must correspond to the receive
channel of the loaded instrument.
• Make sure that the instruments track output is correctly set.
• Make sure that you have properly configured your sound card for use
with Sonar.
(please refer to your Sonar manual for more information).