NAD C660 - Manual (Page 24)

GB
24
PLAYBACK
Playback Chapter 4
PROGRAMMED PLAYBACK
• You can program up to 32 tracks and play them in any order.
• You can program tracks only in stop mode.
1 In stop mode, press CD PLAY or CD REC for the desired deck.
2 Press PROGRAM “PROG” will light and “00 P-01” will be displayed.
3 Press the numbered button to program a track When selecting a two digit track number, the
second number must be entered within 3 seconds after the first number pressed. As each track is
entered, the display will flash three times, alternating between two displays.
4 Repeat step 3 to program other tracks Tracks may also be added using REVERSE SKIP and
FORWARD SKIP to locate the track, and the PROGRAM to enter that track to the programmed
sequence.
5 Press PLAY to start programmed playback The program will remain in the unit’s memory until the
disc is removed or the unit is turned off.
TO CHECK THE PROGRAM
To scroll through a program list, press PROGRAM CHECK repeatedly. Each press of the button will move
through the tracks that have been programmed.
TO ADD A NEW TRACK.
1 Press PROGRAM CHECK repeatedly until “00” will flash.
2 Press a numbered button to add a new track.
TO DELETE A TRACK IN THE PROGRAM
1 Press PROGRAM CHECK repeatedly to select the track you wish to delete.
2 Press PROGRAM CLEAR The selected track will be deleted and programmed tracks with higher
numbers are decreased by one.
TO CHANGE THE PROGRAM
1 Press PROGRAM CHECK repeatedly to select the track you wish to change.
2 Press the numbered button.
TO CLEAR THE PROGRAM
Press PROGRAM while the program is playing “PROG” will go out on the information display.
COAXIAL
CD
TRACK
PROG
SINGLE
CDP
R L
COAXIAL
CD
TRACK
PROG
SINGLE
CDP
R L
COAXIAL
CD
TRACK
PROG
SINGLE
CDP
R L
COAXIAL
CD
PROG
SINGLE
CDP
R L
TRACK TOTAL TIME
“PROGRAM” lights
Programmed track
number
Last track
programmed
Programmed track
number
Program number
Total playing time
of programmed
tracks
Program number
NOTE
In stop mode, simply open and
close the disc tray. Whenever a
disc is removed or the unit is
turned off, the program is cleared
C660 manual 27/2/01 6:03 pm Page 24