Navman Sport Tool W300 - Manual (Page 13)

1-13
W300
NAVMAN
W300 – Setup
4.1.3 Set button beep status
Set beep ON or beep OFF. When beep is ON, an audible ‘beep’
will sound when buttons are pressed.
Access this option
If necessary, press and hold to turn the power on and enter
setup. Press repeatedly until the screen appears as shown
above.
To set button beep status
1) Press to start editing (setting status flashes).
2) Press or to select On or OFF.
3) Press to stop editing.
4) Press to go to the next option, or hold to leave setup.
4.1.4 Set weight units
Set the weight units (kg or lb) for entering user weight value.
Access this option
If necessary, press and hold to turn the power on and enter
setup. Press repeatedly until the screen appears as shown
above.
To set weight units
1) Press to start editing (weight units flash).
2) Press or to select kg or lb.
3) Press to stop editing.
4) Press to go to the next option, or hold to leave setup.
status
weight units
SYSTEM
SET
SYSTEM
SET
kg