NetComm IP DSLAM - Manual (Page 60)

NetComm NCT240 Management Guide Release 1.0
Command usage:
BAS/ip>show
ixp0 ip addr: 192.168.1.1
mac addr: 00:aa:aa:aa:aa:aa
gateway: 0.0.0.0
net mask: 255.255.255.0
eth0 ip addr: 192.168.0.1
mac addr: 00:05:ca:00:04:10
gateway: 0.0.0.0
net mask: 255.255.255.0
Figure 29 ：show command
Arp
Syntax: arp
¾ show – displays the ARP table
¾ flush – remove all of the entries from the ARP table
Command usage:
arp
arp show
arp
*** Device IP : uplink = eth0 , MGMT = ixp0
Set
Syntax: set
¾ ip –set the management ip address
¾ netmask –set the management subnet mask
¾ mac –set the management mac address
59