NISSAN 2010 Cube - Manual (Page 9)

03
MODE BUTTON
Press the MODE button 03
to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
Air flows mainly from the defroster vents.
04
FAN SPEED CONTROL BUTTONS
Press the (slower) or (faster) button to adjust the fan speed.
using the fan speed control buttons will disable the auto mode; to resume auto mode, press
the AUTO button 01
.
05
DEFROSTING/DEMISTING FRONT AND SIDE WINDOWS
Press the defroster control button to turn the system on. The A/c automatically turns
on when the defroster mode is selected.
use the temperature control buttons 02
to set the desired temperature.
To set the defroster on high, press the fan speed control button to increase the fan
speed to the maximum setting.
06
DEFROSTING REAR WINDOW AND OUTSIDE HEATED MIRRORS (if so equipped)
Push the rear window defroster switch on.
Push the rear window defroster switch again to manually turn the defroster off.
This function automatically turns off after approximately 15 minutes.
07
A/C BUTTON
Press the A/C button to manually turn the A/c on or off.
08
AIR RECIRCULATION BUTTON
Press the air recirculation button to recirculate air inside the vehicle; the indicator light
on the button will illuminate.
The air recirculation mode can only be selected if the air flow mode control is in the
following positions: , or .
Press and hold the air recirculation button for more than 2 seconds to set automatic
control for the air recirculation and outside air circulation modes.
09
OUTSIDE AIR BUTTON
Press the outside air button to draw fresh air into the vehicle; the indicator light on the
button will illuminate.
10
OFF BUTTON
Press the OFF button to turn the climate control system off.