NISSAN 2010 Cube - Manual (Page 7)

STEERING WHEEL SWITCHES FOR AUDIO CONTROL/
BLUETOOTH ® (if so equipped)
Press the SOURCE button to turn the audio system on.
To choose AM, fM, XM ® (if so equipped), cd, uSB/iPod ® * (if so
equipped) or AuX, press the SOURCE button repeatedly.
The tuning switches and can be used to perform the following:
• Push the or switch for less than 1.5 seconds to change
to the next radio preset station.
• Push and hold the or switch for more than 1.5 seconds
to seek the next or previous broadcasting radio station.
• Push the or switch for less than 1.5 seconds to change tracks on a cd, iPod ® or
uSB device.
Push the
volume control switch to increase the volume. Push the
volume control
switch to decrease the volume.
*iPod ® is a trademark of Apple inc., registered in the u.S. and other countries.
HEADLIGHT AND TURN SIGNAL CONTROL
HeAdLiGHT cOnTROL SWiTcH
Turn the headlight control switch 01
to the
position
to turn on the front parking, tail, license plate and
instrument panel lights.
Turn the headlight control switch 01
to the position to
turn on the headlights. All other lights remain on.
fOG LiGHT OPeRATiOn (if so equipped)
nOTe: The headlights must be on and the low beams selected for the fog lights to operate.
Turn the switch (inside collar) 02
to the position to turn on the fog lights.
Turn the switch (inside collar) 02
to the OFF position to turn off the fog lights.
HiGH BeAM
Push the headlight control switch forward A
to select
the high beam function. The blue indicator light in
the instrument panel illuminates. Pull the headlight
switch back to the original position to select low beam.
The blue
indicator light goes off.
Pull and release the headlight control switch B
to
flash the headlight high beams on and off.
01 02
A
B