6. power indicator setting, 7. displaying lower resolutions – Eizo COLOREDGE CG303W User Manual

Page 21

3. Screen Adjustment and Settings

3-6. Power Indicator Setting

Light off the power indicator. This function is available for the multiple panels settings.

[Procedure]

1. Select in the ScreenManager menu.

Select "Disable".

3-7. Displaying Lower Resolutions

The lower resolutions are enlarged to full screen automatically. Using the function in the
menu enables to change the screen size.

NOTE

• When "Single Link/10bit" is selected on the menu and 10bit color signal is input (page 11), the

cannot be selected. The screen is displayed in the "Normal" mode.

Enlarge the screen size when displaying a low resolution.

Select the .

Select the in the menu and select the screen size by using

and

Mode

Function

Full

Displays the picture on the screen in full, irrespective of the picture's resolution.
Since the verticalresolution and the horizontal resolution are enlarged at different
rates, some images may appeardistorted.

Enlarged

Displays the picture on the screen in full, irrespective of the picture's resolution.
Since the vertical resolution and horizontal resolution are enlarged at same rates,
some horizontal or vertical image maydisappear.

Normal

Displays the picture at the actual Screen resolution.

Example: Displaying Image size 1280 × 1024 when setting in .

Smooth the blurred texts of the enlarged screen.

Switch the setting.

When a low-resolution image is displayed in the “Full” or “Enlarged” mode, the characters or lines of the
displayed image may be blurred.
Select the suitable level from 1 - 5 (Soft - Sharp).
Select in the menu and adjust by using the right and left switches.

NOTE

• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.

(2560Ч 1600)

(2000 Ч 1600)

(1280 Ч 1024)

Full (Default Setting)

Enlarged

Normal