Eizo COLOREDGE CG303W - Manual (Page 20)

20
3. Screen Adjustment and Settings
3-4. Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount
of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD
monitors when the monitor screen is left on for a long period without use.
[Procedure]
1. Select in the ScreenManager menu.
2.
Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23 hours).
[Off Timer System]
PC Monitor Power Indicator
Operating time (1H - 23H) Operation Blue
Last 15 min. in operating time Advance Notice *1 Blue Flashing
Operating time expired Power Off Off
*1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes.
Extension of operation time can be set without limitation.
[Power Resumption Procedure]
Press to return a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's
power is turned off.
3-5. Locking the Settings
Use the "Adjustment Lock" function to prevent any accidental changes.
Buttons that can be locked • (Enter button) / Adjustments/settings using Adjustment menu
• MODE (Mode button)
•
+ Display setup ( page 11 )
Buttons that cannot be locked •
(Input Signal Selection button)
•
(Power button)
[How to lock]
1. Press
to turn off the unit.
2. Press again while pressing
MODE
.
The screen is displayed with the adjustment lock.
[How to unlock]
1. Press
to turn off the unit.
2. Press again while pressing MODE .
The screen is displayed with the adjustment lock released.