NAD T 514DVD - Manual (Page 13)

13
INITIAL SETTINGS
You can set your own Personal Preferences on the player.
Initial Settings General Operation
1 Press SETUP. The setup menu appears.
2 Press
to select the desired item. The screen will show the
current setting for the selected item, as well as alternate setting(s).
3 While the desired item is selected, press , then to select the
desired setting.
4 Press ENTER to confirm your selection. Some items require additional
steps.
5 Press SETUP, RTN, or PLAY to exit the setup menu.
LANGUAGE
DISC LANGUAGE
Select a language for the disc’s Menu, Audio, and Subtitle.
Original: The original language set for the disc is selected.
Other: To select another language, press number buttons to enter the
corresponding 4-digit number according to the language code list on
page 27. If you enter the wrong language code, press CLEAR.
MENU LANGUAGE
Select a language for the setup menu. This is the menu you see when
you press SETUP.
DISPLAY
TV ASPECT
4:3 Select when a standard 4:3 TV is connected. Displays theatrical
images with masking bars above and below the picture (Display Mode:
Widescreen)
16:9 Select when a 16:9 wide TV is connected.
Display Mode
Panscan: Select when a conventional TV set is connected. The video
material formatted in the Pan & Scan style is played back in that style
(Both sides of the picture are cut off).
PROGRESSIVE SCAN
Progressive Scan Video provides the highest quality pictures with less
flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN connectors, but are connecting the DVD Player to a standard
(analog) television, set Progressive Scan to Off. If you are using the
Component Video connectors for connection to a TV or monitor that is
compatible with a progressive scan signal, set Progressive Scan to On.
CAUTION
Once the setting for progressive scan output is entered, an image will
only be visible on a progressive scan compatible TV or monitor. If you set
Progressive Scan to On in error, you must reset the unit. Press STOP to
stop any disc that is playing. Next, press STOP again and hold it for five
seconds before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
DVD-V
DVD-V
DVD-V
DVD-V
BEFORE OPERATION
Preparation
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
Menu Language
Original
English
Off
Original
Disc Audio
Disc Subtitle
Disc Menu
Move Select
LANGUAGE
DISPLAY
TV Aspect
Widescreen
16 : 9
Display Mode
Off Progressive Scan
Move Select
DISPLAY
TV Aspect
Display Mode
Move Enter Prev.
On Progressive Scan
Enter
Progressive Scan On was selected.
Press 'Enter' to confirm.
Cancel
Off
T514_eng.qxd 11/9/2004 1:02 PM Page 13