Nintendo DSi - Manual (Page 40)

77
Applic
ations & S
ettings
78
Applic
ations & S
ettings
How to Connect
Tap Connection Settings
Tap a connection labeled None
Tap Search for an Access Point
Tap an access point to select it
If no access points are found,
see troubleshooting, page 89.
Internet Setup (cont.)
Searching for and connecting to an access point
Weak Strong
Signal Reception Strength
If you are connecting to a secure access point,
enter the key and tap OK.
This is displayed only when configured
for security.
Tap OK
Tap OK to perform a connection test.
If the connection test is successful, settings are complete.
If connection fails, refer to the list of error codes. See page 98.
Access points marked require that you enter the same key as is registered with the access point.
Key input not
required
Key input required
Configured with an unsupported encryption
format. To connect to access points with this
mark, configure settings through Advanced
Setup. See page 81.
The icon indicates the state of signal reception
and displays at four different levels. Stronger signal
reception results in smoother transmission.
Antenna Bars
0 bars 1 bar 2 bars 3 bars
Broadband
Internet Line
DSL Modem, etc.
Access Point with
Router Functionality
Nintendo DSi System