Nextel comm IR1200 - Manual (Page 28)

iR1200 Modem
20 nextel.com
Installation Steps
To install, you must complete the following steps:
• Mount Modem – Mount the modem in the desired location.
• Mount Antenna – Mount the antenna using the instructions included with
your selected antenna’s installation guide.
• Route and Connect Power Cable – route the power cable from modem
to the vehicle’s power supply (ignition switch).
• Route and Connect the Ignition Cable – Route the ignition cable from
the modem to the ignition.
• Connect Antenna Cable – Connect cable to the mounted modem and
antenna.
• Connect Data Cable – Connect the data cable from the modem to the
mobile device.
Mounting the Modem
Select Modem Location
The following describes typical locations that you should consider for
mounting the modem:
• Under seat
• In trunk
• Under dashboard • In accessory compartment
• Center console
Mounted on side of console Mounted on side wall of trunk