Newcon Optik LRB 6000CI User Manual
Page 18
14
Scanning regime the unit repeatedly measures and
displays results every second while A button is pressed.
To activate Scanning regime press and hold Action button
in Ready mode. The unit will work in Scanning regime
while Action button is pressed.
Scanning or Individual Measurement regimes are
available for any selected mode of measurement. When
two or more parameters are measured in Scanning regime
though first result will be displayed, the second and other
results will be shown at the display if Action button is
released. Nevertheless all data is transferred to the PC and
recorded in internal memory, and may be recalled (see
Data Recall mode for details.)
Operation and service modes
Pressing Mode button (5, Fig.1) in Ready mode switches
the unit between modes of operation, to activate any
desired mode from the menu you must confirm your
selection by pressing Action button (6, Fig.1). The unit
has the following modes of operation:
Ready – Unit is ready to perform measurements
dFLt – sets default mode of operation with factory
settings,
GAtE – allows to set gating distance for
measurement