NEC S 5000 - Manual (Page 32)

When to change the thread
catcher
The thread catcher pads on the bottom
of the rug and floor tool and the
upholstery tool should be replaced as
soon as they appear worn.
Changing the thread catcher
^ Use a knife or similar object to
remove the thread catcher pads from
the slots.
^ Press the new thread catchers into
the slots.
Servicing the floor roller
^ Use a coin to release the roller pin
and pull it out.
^ Push and take out the roller axle.
^ Take out the roller.
^ Remove all threads, hair, etc. and
reassemble the parts.
Spare parts are available from your
Miele vacuum dealer or Miele.
Maintenance and care
32