NEC S 5000 - Manual (Page 28)

Replacing the "Super Air
Clean" filter
^ Open the dust compartment lid.
^ Open the filter frame until it locks into
place and remove the used "Super
Air Clean" filter by the clean corner
(see arrow).
Do not use more than one filter at a
time.
^ Insert the new filter (either way up).
^ Close the filter frame.
If you wish to replace the SUPER air
clean filter with an ActiveAirClean
filter or Active HEPA filter see
"Maintenance and care -
Exchanging exhaust filters".
^ Close the dust compartment lid firmly
until it clicks into place.
Maintenance and care
28