NISSAN PATHFINDER R50 - Manual (Page 22)

22
Fig. 4.5 Bell housing bolt pattern and bolt torque information
7. Refer to section 11 for information on converting the automatic
transmission mount to work on the manual transmission.
8. Reinstall the transmission cross member.
9. Reinstall the front (4wd models) and rear drive shaft.
10. Reinstall the starter and wiring.
11. Plug in all electrical connections.
12. Reinstall any other items not mentioned.
Interior Reinstallation
1.
Reinstall the transmission and transfer case (4wd models) shifters.
2.
Install the new outer manual transmission tunnel cover. (part
number 74967-0W020)
Fig 4.6 Transmission Tunnel Covers Fig 4.7 Tunnel Covers Assembled
3.
Install the inner transmission tunnel cover with boots. (part number
74910-0W010)
4.
Reinstall all interior components removed.
5.
Install the new outer shifter cover.
(part number 74910-0W010)