NISSAN PATHFINDER R50 User Manual

Page 13

Build Date Part Number
1095-0796 23710-0W000-
0796-1296 23710-1W201-
1296-0797 23710-1W203-

0797-0398 23710-1W600-
0398-0998 23710-1W602-
0998-1298 23710-1W608-
1298-0999 23710-2W601-

0999-0100 23710-2W602-

The above parts list only applies to vehicles with the VG33 motor and FED emissions.

1. Make sure the negative battery cable is disconnected.
2. Remove the existing ECM from under the dash above the

accelerator pedal. It’s easiest to remove the plastic panel under
the steering column.

3. Using a 10mm socket unbolt the ECM’s electrical connector and

unplug.

4. Plug in the electrical connector to the new ECM and tighten the

10mm bolt.

5. Reinstall the ECM.

The date of manufacture for your vehicle can be located on the stamp inside of the

driver door jam.