NAD T 531 - Manual (Page 15)

Connecting to a TV
CONNECTIONS
PAGE 15
❍
Refer to the owner’s manual of your TV as well.
❍ Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍ Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers (Refer to “Selecting Digital Audio Output” on page 22).
Notes
Connect the DVD player to your TV.
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
Pr
Pb
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R S-VIDEO
COMPONENT
Y
S-video cable (not supplied)
To S-VIDEO OUT
To COMPONENT
VIDEO OUT
To AUDIO OUT (L/R)/VIDEO OUT
VIDEO OUTPUT SELECT switch
Audio/Video cable
(supplied)
To video input To audio inputs
Video cable (Y, Pb, Pr) (not supplied)
To S-video input
TV or monitor with
audio/video inputs
If the TV has an S-video input, connect
the DVD player with the S-video cable.
For using COMPONENT VIDEO OUT jack, set the
“VIDEO OUTPUT” switch to “COMPONENT” or for
using S-VIDEO OUT jack, set the “VIDEO OUTPUT”
switch to “S-VIDEO”.