Nautilus BE STRONG NS 75X - Manual (Page 10)

10
Step 2 Components: Procedure:
ASSEmBLY
STEP 2
# component Qty
1 Main Base Assembly 1
3 Seat Tube Assembly 1
4 Seat Handle 2
16 Seat Back Support Assembly 1
32 Hex Bolt - 3/8” x 3 1/4”L 6
33 Hex Bolt - 3/8” x 3”L 4
34 Hex Bolt - 3/8” x 2 3/4”L 1
40 3/8” Flat Washer 22
43 3/8” Lock Nut 11
a. Position the Seat Back Support Assembly (16) over the
rear holes of the Main Base Assembly (1) and position
next to the Connecting Tube Assembly (2). Secure parts
with hardware shown above, but do not tighten.
B. Slide the Seat Tube Assembly (3) over the Seat Back
Support Assembly (16) and the Main Base Assembly (1).
Secure parts with hardware shown above, but do not
tighten.
c. Attach the Seat Handles (4) to the Seat Tube Assembly
(3) using the hardware shown above. After the cable is
routed in Step #6
D. Tighten all hardware securely.
3/8" x 3"L 3/8" x 3"L
3/8" x 2 3/4"L
3/8" x 3 1/4"L
3/8" x 3 1/4"L
32
32
33 33
40
4
3
16 34
43 2
1