Setting the lan settings for the projector – Nikon NP2000 User Manual
Page 6
6
3.Setting the LAN Settings for the Projector
3. Setting the LAN Settings for the Projector
This section explains about “Easy Connection” using wireless LAN.
Refer to the manual attached to the projector to enable “Easy Connection”.
• For LT265/LT245, refer to “User’s Manual (PDF)”
• For NP2000/NP1000/LT380/LT280/WT615/WT610, refer to “Wired and Wireless Network
Setup Guide”.
“Easy Connection” is
A unique communication mode that allows you to omit irksome configurations such
as IP address, subnet mask and etc. when connecting your personal computer to a
projector via wireless LAN.
1
Turn off the projector and insert the wireless LAN card into the projector.
2
Turn on the projector and press the