Niles Audio MVC100R User Manual
Page 19
OPERATION
(CONTINUED)
8. To turn OFF the speakers, turn the knob on the volume control fully counter-clockwise, or press the Mute button.
The Mute button will change from Green to Red, indicating the local speakers are Muted.
PROGRAMMING MUTING VOLUME CONTROLS
You can program individual Niles Muting Volume Controls, allowing certain locations (such as the guest bedroom and porch)
to remain muted when system activation turns on other locations (such as the kitchen and family room).
Place the volume control in the desired turn-on state (muted or unmuted) by pressing the mute button.Then press and hold
the mute button for 10 seconds. An LED blinks to indicate that programming has occurred.
Niles Muting Volume Controls come from the factory pre-programmed in the automatic mute mode.
MAINTENANCE
Niles volume controls do not require any regular maintenance other than occasional cleaning. Use a damp soft cloth and
simply wipe the knob and wallplate clean. Do not use an abrasive cleanser as this might scratch the surface of the wallplate.
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
17
DS00317C-0 MVC100_R.indd 19
9/20/06 4:28:49 PM