Niles Audio MVC100R - Manual (Page 12)

INSTALLATION CONSIDERATIONS
(CONTINUED)
CHANGING THE COLOR OF THE KNOB AND THE DECORA INSERT
(CONTINUED)
5. Locate the new knob. Align its flat side to the flat side of the shaft, and push the knob onto the shaft. Holding the
unit as shown in Figure 1, check the alignment of the knob by turning it through all positions.
PREPARING FOR INSTALLATION
NOTE: THE WMVC 100 AND WMV 100E REQUIRE 12VDC POWER TO OPERATE THE MUTING FUNCTION OF THE VOLUME
CONTROL. THEREFORE, TWO CONDUCTOR POWER WIRE MUST BE RUN TO EACH VOLUME CONTROL LOCATION ALONG
WITH FOUR CONDUCTOR SPEAKER WIRE.
Before you install the MVC 100 into an existing wall, consider the possibility of hidden obstructions inside the wall, such as
wood and metal studs; electrical, telephone, or other wiring; plumbing; conduit; and old wall safes.
1. Install the junction box in the usual manner.
2. Run all necessary wiring to the volume control. Label the wires for future reference.
10
DS00317C-0 MVC100_R.indd 12 9/20/06 4:28:40 PM