NordicTrack NTB49030 - Manual (Page 6)

6
2. Attach the Rear Upright (4) to the Base (1) with
two M10 x 178mm Button Bolts (78), four M10
Washers (65), and two M10 Nylon Locknuts (62).
Make sure the large slot in the Upright is on
the indicated side. Do not tighten the
Locknuts yet.
3. Attach the Center Upright (3) to the Base (1) with
two M10 x 178mm Button Bolts (78), four M10
Washers (65), and two M10 Nylon Locknuts (62).
Do not tighten the Locknuts yet.
2
4
1 62
3
3
62
65
65
78
1
78
Large
Slot
Small
Slot
65
65