beautypg.com

Lighting instructions – Napoleon Grills MIRAGE 730 User Manual

Page 5

background image

5

LEFT

BURNER

SIDE

BURNER

LEFTCENTER

BURNER

LIGHTING INSTRUCTIONS

RIGHTCENTER

BURNER

The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning
the cylinder on, only small flames will be achievable.

SIDE BURNER LIGHTING

1. OPEN SIDE BURNER

COVER.

4. IF THE BURNER WILL NOT IGNITE

WITHIN 5 SECONDS, TURN THE

CONTROL KNOB TO THE ‘OFF’

POSITION AND WAIT 5 MINUTES

FOR ANY EXCESS GAS TO

DISSIPATE. EITHER REPEAT STEPS

2 AND 3 OR LIGHT WITH A MATCH.

3. IF THE BURNER DOES NOT

IGNITE, THEN IMMEDIATELY

TURN THE CONTROL KNOB

BACK TO THE ‘OFF’ POSITION

AND REPEAT STEP 2 SEVERAL

TIMES.

2. PUSH AND TURN THE
SIDE BURNER CONTROL

KNOB SLOWLY TO THE

‘HI’ POSITION. THIS

ACTION WILL IGNITE

THE SIDE BURNER

OPEN LID.

ENSURING BURNER CONTROLS

ARE IN THE OFF POSITION, TURN

ON THE GAS SUPPLY VALVE.

MAIN BURNER LIGHTING

1. PUSH AND TURN ANY MAIN

BURNER KNOB SLOWLY TO

THE ’HI’ POSTION. THIS ACTION

WILL IGNITE THE PILOT FLAME

WHICH WILL IN TURN LIGHT THE

SELECTED BURNER. IF THE

PILOT LIGHTS, CONTINUE TO

PUSH DOWN ON THE CONTROL

KNOB UNTIL THE BURNER

LIGHTS AND THEN RELEASE.

2. IF THE PILOT DOES NOT
IGNITE, THEN IMMEDIATELY

TURN THE CONTROL KNOB

BACK TO THE ‘OFF POSITION

AND REPEAT STEP 1 SEVERAL

TIMES.

3. IF THE PILOT AND BURNER WILL

NOT IGNITE WITHIN 5 SECONDS,

TURN THE CONTROL KNOB TO THE

‘OFF’ POSITION AND WAIT 5

MINUTES FOR ANY EXCESS GAS TO
DISSIPATE. EITHER REPEAT STEPS 1

AND 2 OR LIGHT WITH A MATCH.

REAR BURNER LIGHTING

(ROTISSERIE BURNER)

Do not use the rear burner (rotisserie burner) with the main burners operating.

1. REMOVE THE

WARMING RACK

2. PUSH AND TURN THE

ROTISSERIE BURNER CONTROL

KNOB SLOWLY TO THE ‘HI’

POSITION. THIS ACTION WILL

IGNITE THE PILOT FLAME WHICH

WILL IN TURN LIGHT THE

BURNER. IF THE PILOT LIGHTS,

CONTINUE TO PUSH DOWN ON

THE BURNER CONTROL KNOB

UNTIL THE BURNER LIGHTS

THEN RELEASE.

3. IF THE BURNER DOES NOT

IGNITE, THEN IMMEDIATELY

TURN THE CONTROL KNOB

BACK TO THE ‘OFF’ POSITION

AND REPEAT STEP 2 SEVERAL

TIMES.

4. IF THE BURNER WILL NOT IGNITE

WITHIN 5 SECONDS, TURN THE

CONTROL KNOB TO THE ‘OFF’

POSITION AND WAIT 5 MINUTES

FOR ANY EXCESS GAS TO

DISSIPATE. EITHER REPEAT STEPS

2 AND 3 OR LIGHT WITH A MATCH.

INFRARED

BURNER

REAR

BURNER

CENTER

BURNER

If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit match down
through the grill and sear plate while turning the corresponding burner valve to high.