Nilfisk-Advance America SR 5120 P/B - Manual (Page 11)

S31NUK5120(3)2001-04
P1 P2
USE OF THE WORKING PROGRAMS
Once the machine has been turned on and
eventually after starting the petrol engine,
choose one of the two working programs P1 and
P2 according to your cleaning need and press
the relevant button:
P1 is the “light cleaning program” (for internal
environment, i.e. smooth floor, moquette, small
debris etc.)
P2 is the “hard cleaning program” (for external
environment, i.e. asphalt, uneven floor, big
debris etc.).
After having pressed the preferred button the
relevant light indicator will turn on, together with
the suction motor indicator.
The temporary activation of the main brush and
suction electric motors will also occur; (the
relevant light indicators will flash).
Note : the working parameters of programs P1
and P2 are pre-set by the manufacturer of
the machine: if you want to change the
pre-set values call the customer service
personnel of your supplier.
Lower the side brush/es by pressing the top of
the relevant lever and moving it forward.
Note : on the control panel the corresponding
light indicators will turn on.
To lift the side brush/es press the top of the
levers and move them backwards.
Note : the side brush/es, the main brush and the
suction fan will start automatically when
the accelerator pedal will be pressed
(AUTO POWER-ON).
USE
9