Nikon LS-4500AF - Manual (Page 42)

22 Nikon Film Scanner LS-4500AF User's Manual
5. Operation
5.1 Turning on the Power
Before turning on the power, confirm that the locking screw is loosened.
Turn on the power of peripheral SCSI devices (including the LS-4500AF)
first, and then turn on the host computer's power. As soon as the power is
turned on, the POWER LED and BUSY LED light up. After stage move-
ment has started, the BUSY LED begins flashing. After ejection of the
stage (film holder), the lamp (the light source in the unit) lights for mea-
surement of the characteristics of the lamp (a click will be heard, which is
the sound of the switch being operated), and the stage is moved to the
waiting position to complete the initial setting. The BUSY LED then goes
out.
After the BUSY LED has gone out, a command can be received from the
interface. It takes about 30 seconds from when the power is turned on to
when the BUSY LED goes out.
To loosen the locking screw
5. Operation